Chore-Time Incinerator Specifications

Chore-Time Incinerator
Specification Chart

Model Number	A200	A400	A500	A850
CAPACITY
Waste Chamber Capacity (Type IV Waste - Animals)	200 lbs. (91 kg)	400 lbs. (181 kg)	500 lbs. (227 kg)	850 lbs. (386 kg)
Waste Chamber Volume (Type IV Waste - Animals)	6.3 Ft³ (0.18 m³)	12.6 Ft³ (0.36 m³)	14.7 Ft³ (0.42 m³)	26.5 Ft³ (0.75 m³)
OPERATION
Charging Rate per Charge - Batch Loaded (Typical pathological waste with a BTU/lb. rating of 1000)	200 lbs. (91 kg)	400 lbs. (181 kg)	500 lbs. (227 kg)	850 lbs. (386 kg)
Burn Rate (Per Hour)	45 lbs. (20 kg)	55 lbs. (25 kg)	70 lbs. (32 kg)	90 lbs. (41 kg)
Approx. Time for Complete Burn-Out (Cool down and remove ash before reloading)	4.5 hours	7 hours	7 hours	9 hours
Approx. Amount of Residue (Cool down and remove ash before reloading)	10 lbs. (4.5 kg)	20 lbs. (9 kg)	25 lbs. (11 kg)	42.5 lbs. (19 kg)
Timer Type	12-Hour Manual Timer	12-Hour Manual Timer	12-Hour Manual Timer	12-Hour Manual Timer
DIMENSIONS & WEIGHT Outside Dimensions (excluding stack on A200 and A500; excluding arms & burner on A850)
Width	26 in. (66 cm)	36 in. (91 cm)	34 in. (86 cm)	44.5 in. (113 cm)
Height	32 in. (81 cm)	34 in. (86 cm)	38 in. (97 cm)	45 in. (114 cm)
Length	42 in. (107 cm)	48 in. (122 cm)	60 in. (152 cm)	60 in. (152 cm)
Other Dimensions & Specifications
Door Opening	18 x 20 in. (46 x 51 cm)	22 x 29 in. (56 x 74 cm)	26 x 30 in. (66 x 76 cm)	21 x 27 in. (53 x 69 cm)
Height to Door Opening	29.5 in. (75 cm)	30.5 in. (77 cm)	35 in. (89 cm)	36 in. (91 cm)
Height to Top of Stack	8 ft. 6 in. (2.6 m)	11 ft. (3.3 m)	14 ft. (4.3 m)	16 ft. (4.8 m)
Minimum Suggested Slab Size without a Shelter (length x width x thickness)	6 ft. x 8 ft. x 4 in. (1.8 m x 2.4 m x 10 cm)	6 ft. x 8 ft. x 4 in. (1.8 m x 2.4 m x 10 cm)	6 ft. x 8 ft. x 4 in. (1.8 m x 2.4 m x 10 cm)	8 ft. x 10 ft. x 4 in. (2.4 m x 3 m x 10 cm)
Approx. Total Weight	1330 lbs. (603 kg)	1969 lbs. (896 kg)	2700 lbs. (1225 kg)	4000 lbs. (1820 kg)
Units per 40-Foot Container	21	12	10	10

1. Always install incinerators in accordance with local codes and ordinances, subject to regulatory agencies.

2. Stack test data is available from the distributor for permit application. If on-site testing is required, it is the responsibility of the purchaser and can be arranged through the distributor.

3. Outside installation is recommended with a simple metal roof or three-sided metal shelter, providing a minimum of four foot clearance from any combustible material.

Return to incinerator page menu.